Balance Chart
A visual tool that shows the work content of multiple operators or process steps in relation to the takt time, with the aim of distributing the workload evenly and making waste in the form of waiting time and unbalanced staffing visible. The balance chart is also known as an Operator Balance Chart (OBC) or yamazumi board, where yamazumi is Japanese for 'stacking'.
Balance Chart
A visual tool that shows the work content of multiple operators or process steps in relation to takt time, with the aim of distributing the workload evenly and making waste in the form of waiting time and unbalanced staffing visible. The balance chart is also known as an Operator Balance Chart (OBC) or yamazumi board, where yamazumi is Japanese for ‘stacking’.
Structure and operation
A balance chart consists of a series of vertical columns, one for each operator or process step, made up of stacked blocks representing individual work elements. The height of each block corresponds to the time required for that element. The total column height shows the work content of that operator or step. A horizontal line at the level of the takt time immediately shows which operators are working below, at or above the desired pace.
This visual structure makes the balance chart more than a recording tool. By moving work elements from one column to another, you can calculate how the workload can be distributed most efficiently, with the work content of each operator as close as possible to the takt time.
What the balance chart makes visible
In an unbalanced process, the column heights are uneven: one operator has more work than the takt time allows, while another consistently has less. This means that the first operator determines the pace of the entire process and the second is waiting. Both situations represent waste, but of different kinds. The first limits output, while the second conceals excess capacity that could be put to better use elsewhere.
The balance chart makes both forms visible at a glance, without requiring analysis or calculations. This makes the tool particularly suitable for use on the shop floor, where decisions about work allocation need to be made quickly and based on facts.
Balance chart and takt time
Takt time is the reference point on which the entire balance chart is based. If customer demand changes and therefore the takt time changes, the desired distribution of work elements across operators also changes. The balance chart makes this recalculation clear: which elements need to be moved, how many operators are needed at the new takt time and where do new bottlenecks arise?
This makes the balance chart not only a tool for designing a work cell, but also a tool for adapting that cell to changing circumstances.
Relationship with standardised work and Kaizen
The balance chart works together with standardised work: the work elements shown in the chart come from the time measurements underlying the standardised work sequence. A balance chart without reliable time measurements for each element cannot be used as a basis for decisions about work allocation.
Conversely, the balance chart is a starting point for Kaizen: work elements that take an excessive amount of time, fit poorly with adjacent elements or consistently push one operator above the takt time are immediately visible in the chart as improvement opportunities. For more detailed process analysis, which also takes walking times and machine processing times into account, the balance chart is supplemented with the Standardized Work Combination Table.
Would you like to learn how to make a process flow? Continuous flow is one of the four management tools in the Lean Black Belt training. You work with the book Creating Continuous Flow and practise the design in a realistic simulation.